0086-13671585101

sales@xhfiber.com

portuguêsportuguês
notícia
home notícia

Why Your Fusion Splicer is Mission Critical in Fiber Laser Repairing Work

Categorias

Novos produtos

Why Your Fusion Splicer is Mission Critical in Fiber Laser Repairing Work

  • 2025-06-27

1.What Does This "Fiber Splicer" Actually Fix?

Broken Wires (Fibers): Inside the laser, super-thin glass fibers carry the light. These can snap during handling, get bent too far, or get damaged by heat or dirt. You can't just plug them back together like an extension cord deep inside. The splicer cuts out the bad piece and permanently welds in a new section of matching fiber, making the light path whole again with almost no loss.

 

Replacing Worn-Out Parts: Lasers have special protective tips (like end caps) on their output fibers. If these get damaged or stop working well, the whole laser suffers. The splicer carefully welds the laser's internal fiber onto a brand-new replacement tip, which is a very precise job.

 

Adding New Bits: Sometimes a repair means putting in a new part, like an isolator (which stops harmful light reflections). These parts have their own little fiber tails. The splicer welds these tails directly onto the laser's existing fibers, making a strong, low-loss connection inside the machine.

 

2.Why is Welding Fibers Better Than Other Ways?

Almost No Power Loss: Every bit of light matters in a laser. A good fiber weld loses way less light power than any connector you could screw on.

 

Stops Harmful Reflections: Reflected light bouncing back inside a laser is bad news – it can make the laser unstable or even damage it. A clean fiber weld creates much less reflection than connectors.

 

Super Strong & Reliable: Once welded and protected with a sleeve, the joint becomes incredibly strong. It handles vibration and heat changes inside the laser much better than connectors that could come loose or get dirty over time. It's a permanent fix.

 

Fewer Weak Spots: Welding means fewer connection points inside the laser where things could potentially go wrong later.

 

3.The Bottom Line for Fixing Lasers:

If you work on fiber lasers, a good fusion splicer isn't just a nice-to-have tool; it's absolutely necessary. You simply can't do reliable, high-quality repairs on these machines without one.

 

It delivers the strong, low-loss, low-reflection connections that keep the laser running powerfully, efficiently, and reliably after the repair.

 

Investing in a quality fusion splicer and learning how to use it well is fundamental for any team serious about fixing fiber lasers quickly and getting them working like new again. When the laser stops, this "fiber splicer" is your best choice.

© Copyright: SHINHO OPTICS LIMITED Todos os direitos reservados.

topo

Converse agora

Bate-papo ao vivo

    agora os produtos e serviços do Shinho são amplamente aplicados em engenharia de comunicação, rede doméstica, produção de dispositivos ópticos, pesquisa científica, etc. eles são exportados para a europa, américa do norte, áfrica, américa do sul e outros países asiáticos. qualquer inquérito, por favor, não hesite em contactar-nos!